302 Stainless Steel Plate

302 Stainless Steel Plate

302 stainless steel is a variant of 18% chromium and 8% nickel austenitic stainless steel. This alloy is the most common and frequently used alloy in the stainless steel family. 302 are slightly higher carbon versions of the 304, usually in the form of ribbons and wires. It is a tough, tough grade, has considerable corrosion resistance, is non-magnetic, and cannot be hardened by heat treatment. 302 are typically used in their annealed state and have a high degree of ease of manufacture and formability.

Detail
Get ln Touch
304 Stainless Steel Plate

304 Stainless Steel Plate

304 stainless steel is a kind of universal stainless steel material, rust resistance than 200 series of stainless steel material is stronger. High temperature resistance is also better, can be as high as 1000-1200 degrees. 304 stainless steel has excellent corrosion resistance and good intergranular corrosion resistance. For oxidizing acids, it is concluded in the experiment that 304 stainless steel has strong corrosion resistance in nitric acid with a concentration of less than or equal to 65% of the boiling temperature. It also has good corrosion resistance to alkali solution and most organic and inorganic acids.

Detail
Get ln Touch
GB/T11251 1345 Alloy Structural Steel Coil

GB/T11251 1345 Alloy Structural Steel Coil

GB/T 11251 alloy steel is one of the common hot-rolled alloy structural steel coils. GB/T 11251 Hot-rolled coil has high strength and wear resistance, high hardenability, moderate cold deformation plasticity, good cutting performance and good welding performance. During the heat treatment, the toughness of the steel decreases less. GB/T 11251 alloy steel can still maintain high toughness under water cooling conditions, but it has a tendency of overheating sensitivity, white spot sensitivity and temper brittleness.

Detail
Get ln Touch
A588 Pressure Vessel Carbon Steel Coil

A588 Pressure Vessel Carbon Steel Coil

ASTM A588 steel is a high-strength low-alloy structural steel section, coil and bar used for welded, riveted or bolted structures. These steels are mainly used in welded bridges and buildings where weight reduction or increased durability is required. In most environments, the atmospheric corrosion resistance of this steel is significantly better than that of carbon structural steel with or without the addition of copper.

Detail
Get ln Touch
DIN 17155 Pressure Vessel Carbon Steel Coil

DIN 17155 Pressure Vessel Carbon Steel Coil

DIN 17155 pressure vessel steel coils are steel for boilers and pressure vessels. In addition to boilers and pressure vessels, DIN 17155 pressure vessel steel is also used to manufacture high-temperature liquid transportation pipelines.

Detail
Get ln Touch
A537 Pressure Vessel Carbon Steel Coil

A537 Pressure Vessel Carbon Steel Coil

ASTM A537 Boiler vessel coils are heat treated carbon manganese silicon steel coils used in pressure vessel fabrication. ASTM A537 Boiler Vessel Rolls are available in three grades, Grade 1, Grade 2, and Grade 3.

Detail
Get ln Touch
A533 Pressure Vessel Carbon Steel Coil

A533 Pressure Vessel Carbon Steel Coil

ASTM A533 Boiler Vessel Coil is a manganese-molybdenum and manganese-molybdenum-nickel alloy steel coil suitable for welding pressure vessels. Often with quenching and tempering heat treatment, that is, quenching and tempering state supply. ASTM A533 boiler vessel steel is available in five different strength grades: Class A, Class B, Class C, Class D, and Class E. There are three levels of each category: level 1, level 2 and level 3.

Detail
Get ln Touch
A515 Pressure Vessel Carbon Steel Coil

A515 Pressure Vessel Carbon Steel Coil

ASTM A515 is the same as ASME SA-515 and is the standard specification for welding carbon steel pressure vessel plates for high temperature service in boilers and other pressure vessels. A515/SA-515 plate can be divided into 3 grades according to its minimum tensile strength: grade 60, grade 65 and grade 70.

Detail
Get ln Touch
API Spec 5L Pipeline Steel Coil Steel Plate

API Spec 5L Pipeline Steel Coil Steel Plate

API Spec 5L is an international standard that specifies the manufacturing requirements for two product specification grades (PSL 1 and PSL 2) of seamless and welded steel pipes used in pipeline transportation systems in the oil and gas industry.

Detail
Get ln Touch
< 123456 >

Contact us now!

Need help? We're always here to assist you!

yliwei2736@gmail.com

+86 17663571767

+86 17663571767

17663571767

Whatsapp

Whatsapp

WeChat

WeChat

Address: No.117 Qianjin Street, Dong'e County, Liaocheng City, Shandong Province

MEIHUA METAL

Please feel free to contact us if you have any questions or need assistance.

Please enter your information, and our team will get back to you as soon as possible.

Submit